How to upgrade HTC HD2 ROM Through SD Card? (Video)

Normally, we upgrade HTC HD2 Windows Mobile ROM using RUU with USB cable. It is faster than using SD card method. Then why do we need to upgrade HTC HD2 ROM through SD card?

  • Windows Mobile 6.5 ROM is corrupted
  • Remove HSPL3 ~ SPL-2.08.HSPL

You cannot upgrade HTC HD2 Windows Mobile ROM using RUU when you cannot even connect through Windows Mobile Device Center or ActiveSync. And the only way to remove HSPL is to use SD card upgrade ROM method with official HTC HD2 stock ROM.

Do a backup with PIM Backup v2.8 before upgrading your Windows Mobile ROM. Note – all your data will be deleted when install new ROM. Download official HTC HD2 v3.14 ROM or latest and get ready to start.

By the way, no need to load into bootloader to see HSPL. That’s for your information that SD card upgrade method can really remove HSPL in the video. And for corrupted Windows Mobile case, just copy leoimg.nbh file to your SD card using SD card reader instead of USB cable in the video. Then continue from there…

Step by Step Guide

  1. Power off your phone.
  2. Press volume down button (don’t let go) and power on your phone.
  3. It will load into bootloader.
  4. You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
  5. Take off the battery.
  6. Power on your phone.
  7. Connect USB cable from PC to phone after Windows Mobile loaded.
  8. At PC, right click and open official HTC HD2 ROM with 7-Zip.
  9. Copy ‘RUU_signed.nbh’ to desktop.
  10. Rename it to ‘leoimg.nbh’.
  11. Connect to SD card storage using Windows Mobile Device Center / ActiveSync.
  12. Copy leoimg.nbh to SD card storage.
  13. Disconnect USB cable from phone.
  14. Open ‘File Explorer’.
  15. Go to ‘Storage Card’.
  16. Confirm that leoimg.nbh is in SD card root level.
  17. Power off your phone.
  18. Press volume down button (don’t let go) and power on your phone.
  19. It will load into bootloader.
  20. You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
  21. Let go volume down button when you see ‘loading…’.
  22. Then ROM upgrade screen will be loaded.
  23. Press power button to start update the ROM.
  24. ROM update process will take around 15 minutes.
  25. Take off the battery after update success.
  26. Power on your phone.
  27. First time use preparation process will take around 4 minutes.
  28. Then follow phone onscreen instructions to setup.
  29. Power off your phone.
  30. Press volume down button (don’t let go) and power on your phone.
  31. It will load into bootloader.
  32. You should get ‘Red, Green, Blue and White’ screen with SPL-3.03.
  33. Press volume down button to cancel ROM update.
  34. That’s all.

After remove HSPL3 ~ SPL-2.08.HSPL, no worry about warranty issue when send your HTC HD2 to service.

273 COMMENTS

  1. hi jayce,
    why you keep on warning that rom upgrade is not intented for t-mobile US version.Will there be any problem if we upgrade the rom on t-mobile US rom.Mine is T8585 US version but I have upgraded to custom energy cookie rom after flashing hspl3~spl vs2.08 and radio rom vs 2.14.50.04 and both windows 6.5 and android 2.2 froyo is working fine.Should I upgrade to rom vs 3.14

  2. Jayce:

    I have installed hspl3 and have radio 2.15 and flashed a core cell custom ROM, then I used MaGLDR and flashed future shocks miui nand ROM.

    I did not install clockworkmod recovery.

    when i try and flash windows it doesnt connect via usb.
    the ROM update utility does not recognized the phone to pc.

    I tried the sd method and started from step 17 and When I try this method to reboot windows on my phone it stops at RED,GREEN,BLUE, WHITE screen and it says SERIAL at the bottom

    im guessing the method doesnt work in my situation, everywhere i search they tell me to flash old window rom but it wont flash.(tried multiple usb cords, and pcs and roms and it does not work)

    plz Can u help and tell me a way to get my windows ROM back?

      • I’m getting the same issue. I am able to use aMAGLDR V1.11 to move files from my computer to my SD card, but when I go to bootloader it just sits on serial. I’ve downloaded multiple different WinMo roms to try and renamed the RUU_signed.nbh files to LEOIMG.nbh and it does the same thing. Any help would be appreciated.

    • Any progress here? I’m trying to restore my HD2 to W6.5 I have the latest update from T-Mobile and extracted and renamed the nbh to LEOIMG. But like John, my phone is stuck at SERIAL.

      • Oops, I should have kept reading. Further down the thread, I found the answer. When at the RED,GREEN,BLUE,WHITE screen with the SERIAL at the bottom, I connected the phone via USB to the computer. The computer (Win7) detected it and said “Drivers installed, ready to use.” I simply double clicked the T-Mobile software package and it started to run and update. All done after about 4-5 minutes. Thanks for the post!

  3. Hi Jayce,

    My HD2 got into a big issue… when doing the Magldr installation.
    It get stuck duringboot up screen with only the HTC logo display(nothing else) and stuck forever.

    So I try using the SD ROM upgrade method to restall back.
    But it also stuck at the “Loading…” and not responding…

    Need help.. anyone pls…

  4. CAn SOMEONE HELP ME WITH MY HD2 ITS NOT WORKING CAUSE IVE INSTALLED THE SOFTWARE NOW IT DOESNT IT JUST LIKE WHITE SCREEN WITH HTC THATS ALL BEEN ERASE PLSS HELP ME……..

      • Yes, that’s the T-mobile version i wanted to install but the installation was not successful and now i’m stuck with RED, GREEN, BLUE, White screen each time it boots.
        Please help! How can i load everything back for function? If i boot without the SD card, I’ll get the “Software update failed, please try again” message!

        Tried to install HSPL3 you suggested, getting this error :
        CRITICAL ERROR
        Flow: 00000003
        Error Code: 00000004
        Description: Bad model ID!

  5. Yes it got Red, Green, Blue and White’ screen with SPL-2.08.
    Take off the battery.
    Power on phone.
    My phone doesn’t have R 2.15.50.14 at bottom of the screen only the green HTC Logo.please help.

  6. jayce, i am trying to restore my hd2 back to wm6.5 but my hd2 can’t connect to my wmdc.
    and where can i download the wm6.5 rom version 1.43.405.1 (70124) wwe?

  7. hello, after remuve wm7 from htc hd2 (thanks) , I have rom 3.14, no HSPL, how can I instal NAND Android, and what I need to reinstal

    • Both will work on Europe HTC HD2 which has 512 ROM like mine. Difference? Each ROM chef has own way of cooking. So hard to compare unless you test it out everything (which I did not).

  8. My HD2 update software failed, SPL-2.08.0000

    Message : Upgrade ROM code error Please try again.

    So I try using the SD ROM upgrade method to reinstall back.
    But it also stuck at the “Loading…” and not responding…

  9. Who can help me?
    I cant update my hd2
    it gets stuck on the white screen with loading…
    dosnt update, i tried more roms (from origional website)
    also i cant update the normal way by usb cable.
    Ive got spl 2.08
    Ive got this problem since i tried to use android but also that didnt work.
    Phone works but im stuck with the old 1,43 rom so i cant use messeging and stuff.

  10. Hi Jayce,

    I tried the above steps to revert to my stock rom downloaded from HTC site. All went fine (like your video above) and displayed OK until it reached the EXTROM. Only a 5-10% of the update remains on screen displaying Update in Progress… I am stuck in this screen for hours, nothing seems to have happened. Mine is a Singapore set still under warranty. In this stage, will the details on my phone that I installed for Android {my HSPL, Radio Version: 2.12.50.02_2 (old 2.07.51.22_2) Protocol Version: 15.40.50.07U (old 15.32.50.07U)} be erased. Why I asked this is, if I go to the HTC service centre, will they identify I installed customROM that has made my warranty void?

  11. hello jayce im here in some confusing situation. ive contacted hd2 forum on xda developers but couldt get proper solution. i was trying to update htc hd2 tmob uk rom but instead of that i accidentaly ran magldr . i think that flashed my windows. i was running android also bootable from sd card. now as i switch on mobile i get a black screen 12 boot options which are:
    boot wph.
    boot ad sd.
    boot ad nand.
    usb mass stg.
    usb flasher.
    usb tty.
    ad hard reset.
    ad recovery.
    tetris .
    services .
    reset and
    power down.

    now ive downloaded original rom for htc hd2 by tmob uk from htc.com.
    as by clicking on 1st option boot wph i get error message wph not installed & by clicking on 2nd option the boot ad sd i get error message android load at 11800000 from micro sd load zimage K: /DCIM/zimage
    sd kernel open failed /7 by clicking on 3rd option ie Boot AD NAND i get error message no boot sources.
    So now im eagerly waiting for any solution you can provide . Thanks

  12. Hi Jayce

    I’ve downloaded the stock ROM for my Telstra HD2 from the HTCAU site and this is what I got:_”HTC HD2_RUU_Leo_Telstra_WWE_1.72.841.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe”

    It’s an EXE file not NBH.?

    How would I get hold of the NBH version?

    BTW There is nothing wrong with my HD2, I’m just getting ready to flash NAND Android and I want to make sure I got some backup if things go wrong.

    Your tutorials are very cleanly done. I have learned a lot from your site.

    Regards,
    Owen.

  13. Im trying to load windows on the phone. I have the file on the sd, When I boot to bootloader. No matter how long i hold Volume down I am not getting a loading screen. What am I doing wrong

  14. my htc hd2 turn off . becouse i was upgrade the bois in it and the battry began empty so my phone is not turn on so plz help me in any way to turn on my phone and to install new softwar for it plzzzzzzzzzzzzzzzzzzz helppppppp meeeee 🙁 🙁

  15. hi,
    i have HD2 and install win7 and got problem it does not work now it restart it self a message says
    booting WPH
    WPH LOAD
    1EFATAL HIT 1

    i want to remove win7 . please help me what i suppose to do

    Hilal

  16. hi jayce, if i upgrade my rom with this method..did my hspl 2.08 & radio 2.15 will removed ? if yes can i install them again..

  17. hi jayce! i updated my HTC HD2 Hongkong ROM with 3.14, unfortunately it loads but freezes just before il normally have quietly brilliant! i removed the new ROM and replaced it with the old one and now its freezing there as well! please advice as i cant use it anymore

  18. i have a prb with my htc hd2 : turn on but keep freeznig on htc logo and i try to press the turn on button and the volum key , it work but the freeznig is steel so plzzzzz hellp me what i must to doooooo plzzzzz help me :S

  19. hey buddy ur site helped me lot than xda developers . i am a great critica condition my phone isnt upgrading using usb it only upgrades through a2sd only now i am using miui rom for mob now . itds workin well in hd2 but i need to go for default android version can u help me get out from this pls………………….. bro !!!!!!!11

    thanks in advance .. b:::D

  20. hey when i did the above videoprocess trying to upgrade through leoimg.nbh boot loadeer opens goes on loading till half an hour its disgusting

  21. hey bro i need a small help from u………….can u pls say me a win 6.5 a2sd rom download link pls ……………………n i have ported to android 2.2 stock rom for my hd2. mob can flash but using usb flash but cant upgrade through boot loader

      • THE ANDROID VERSION U GAVE ISTALLS SUCCESSFULLY BUT WHEN ITS REBOOTS IT LOADS TILL HTC THEN REBOOTS N DOES THE SAME PROCESS ……………………………………….DON NO WAT D HELL IS GOIN ON IN THIS MOB REALLY BECAME MAD
        BUT THANX FOR UR SUPPORT BRO ……..IT WOULD BE GREATFUL TO ME IF U HELP ME SOLVE THIS PROBLEM 🙂
        THANK U VERY MUCH JAYCE

  22. Hi Jayce,
    good work there. i hava verizon htc tp2 which i tried to update the rom from 6.1 to 6.5. the update completed successfully and when the phone was restarting it got stuck with a white screen with a big green HTC written on the screen and also
    B 04
    R 2.37.00WU
    P DSDCANPZM-6125
    D 4.01.93615

    I can even connect the phone to the pc no more. please help out how can i bring the phone back to life.

  23. Hi Jayce,
    I love what you are doing here and all the information that you have provided. I’ve loaded many different android roms (successfully) on my htc hd2 and have encountered problems with my phone. I want to send it in but not sure how to remove HSPL. It’s a hd2 from t-mobile. The radio is 2.15.50.14 and the ROM is 3.14.531.1(04666)WWE. Any help would be much appreciated.

      • I want to do the SD card method but I’m not sure how to approach given that the ROM’s are not for T-Mobile. I get an .exe file from the T-Mobile website but again I’m not sure how to approach this. I’m not trying to brick my phone in the process.

        • Only use official ROM for your phone like T-Mobile for you. My ROM is in .exe format too. I used 7-zip to extract RUU_signed.nbh.

          But I did not test it on T-Mobile HD2. So I am not sure this method will 100% work for you or not. But it works for me as you can see in the video…

  24. hi
    jayce i have big problem. i was trying to install “nand-android-on-htc-hd2-with-clockworkmod-recovery” i followed each step every thing was working fine but i just forget one step i did not install clockworkmod recovery before nand android. when nand android installed without clockworkmod recovery it stick on options again it tried to install clockworkmod from options but it gives some error. i also tried to go back to wm6.5 update complete successfully but when i restart my mobile again it go to same options of andriod again….. plz help me
    thank you….

    • Here are the list from HTC website…
      1. This upgrade for HTC HD2 includes all previously released updates.
      2. For the Contacts application allowing for faster searching and locating contacts.
      3. Enhanced handling for CPU processing that will quicken the background processes allowing for an overall improved experience.

      In detail, I also don’t know.

  25. bro! actually my mob is not downgrading to windos 6.5 which i need to go for android version through hret.exe thats my problem actually

      • i am using android 2.2 and i want to get back to windows mobile 6.5……..
        i am not able to downgrade through leoimg.nbh or through ruu………error saying connect usb cradle correctly but my usb is correct
        and when the rom update utility starts my current image version on hd2 is not detected i think so thats the main problem

  26. Thanks for the guide and video. I am having trouble getting into bootloader. I am holding volume down and power but never get to any tri-color bootloader screen. I can still boot MAGDLR and boot into android, but I need restore to stock and can’t seem to get there no.

    Any advice would be great, thanks!

      • Finally got it! I had to just let it wait for a few hours and cool off I believe. I was trying for 2 days haha, finally took the battery out for a couple hours and after 2nd boot it came up.

        I think this HD2 has heating problems. Its going in for repair, it was having boot problems and such before.

        (but yeah the vol down button would work still in android which was frustrating)

  27. Hi Jayce, my hd2 is SPL-1.42. i try many time and twice way to upgrate rom. But all the way i try is can’t be progress and this way u teach us i try for my hd2 does not working. what sould i do again? what the way i should be try again?

  28. t-mobile htc hd2 hello please could you help me my information from my phone OS version: 5.2.21913 (21913.5.0.94)
    Manila version: 2.5.20181424.0
    ROM version: 3.14.513.1 (04666) WWE
    ROM date: 09/29/10
    Radio version: 2.15.50.14 how do I make Android
    please mi

  29. i acquired the hd2 from t-mobile and did a hard reset unaware of the upgrade and now stuck in boot loader screen, what can i do i’m not tech savy and dont have access to individual who did the upgrade

      • Never mind, it works.
        I had froyo running from my SD card.
        I wanted to try this gingerbread instead.
        I removed the map “android” and put the new gingerbread map “android” on my SD card.

        It’s like a fresh install, and didn’t even installed new radio.

  30. hi brother i have htc hd

    CPU qualcomm(R)8250B
    speed1024MHz
    Ram size 576mb
    Flash size 1024mb
    data bus 32 bits

    os version 5.2.21892 (21892.5.0.89)
    manila version 2.5.20121412.2
    rom date 04/28/10
    Radio version 2.10.50.26
    Protocol version15.39.50.07u

    i try to install android frm autotradeking.com i install hspl but now i want to remove it there r many videos but they shows that you have to press volume down button to start bootloader and my volume buttons are not working plz help me how can i remove hspl without using volume button

  31. Hi Bro. I have big pro.. with my htc hd2 cause my battery is Low whiLe m trying update rom. when it proccesing onLY 7% the pc show msm error. and pc show to remove battery and reinstaLL it. i do that but phone can not turn on even htc screen and bootLoader. PLS HeLppppppp Thankkkk

  32. Thanx Jayce for all ur concerns about us.
    Pls, i upgraded my htc hd2 t8585 from :
    rom ver:1.48.405.2 WWE
    RADIO VER: 2.05.51.05_2

    tO

    3.14.XX.XX.
    2.08.XX.X

    but ever since i did this upgrade , i have been experiencing freezing on my touch screen
    at times i would not be able to do anything throughout the day, pls can u advice me, thanx

  33. hi JAY

    i have htc hd2 t8585 made in taiwan and i cant start phone and i try the vol up down button but no respond plzz help me…

  34. hi after copying leoimg.nbh to sd card, i turned my phone off & powered on with volume down it loads to bootloader but loading white screen does not come. I copied via active sync (you said make sure file is at root ) what is root level

  35. I am keen to load Android and found that ROM 3.14 is needed for the Gingerbread distributions

    I tried to update from your 3.14 update ROM using both SD card method and USB methods but both methods did not work.

    I have only SPL 1.42 (no HSPL) and ROM 1.66.707.1 (76641) WWE

    In both cases, I see the “loading” followed by “Not Allow” 00028002

    Any advise?

    • Just to clarify, the ROM

      RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe

      was obtained from XDA since HTC does not have any official HTC HD2 ROMs anymore for download.

      I would appreciate some advise

      Thank you..

      • HTC does not provide anymore ROM updates. May I ask which ROM will match my phone region?

        Anyway, I found out in the morning that the phone was hung and after a restart, HTC Sense does not load anymore, although Windows Mobile 6.5 still works. The phone is not bricked but it cannot detect SIM card and it cannot be used as a phone…everthing else seems intact but there are some complaints about programs crashing. (send/don’t send to Microsoft)

        I found an old ROM from XDA called
        _HTC HD2_RUU_Leo_HTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe

        Should I try reloading this old ROM (my ROM is still the same now, just HTC Sense does not work)

        HTC is not much help as they said that they are not providing ROM updates in the meantime as they are re-organising their website.

        Please help!!! I am lost….

  36. Hi Sir Jayce,

    Good Day, I have HTC HD 2 and i tried to update , if i switch it on,the phone stock up in “HTC logo” and white screen, I trust its a software issue. Is there any solution available sir, I follow the steps in your website using sd card with the adaptor,and not in WMDC nor activesync, If I enter to bootloader it will give the following:

    PB81100 HX-BC
    SPL-2.08.HSPL 8G XE
    0X05
    CotullaHSPL 0X50

    I am now stock in this area and don’t know what to do with my phone.
    I am from singapore sir your help is very much appreciated.
    My set is not anymore under warranty.

    I am glad to here from you,

    Kind Regards

    Cris

  37. Sir Jayce,,

    I want WM.6.5 back to my cp sir. Yes I saw and enter loading but it fails to update after 15%.
    In the video you have” cottullaHSPL 0x30″ mine is “cottullaHSPL 0x50” sir can help me pls. Thanks

    Kind Regards

    Cris

  38. Hi Jayce,

    I had sent a msg on your post for reinstalling HTC HD2 wherein I was unable to do so using an SD card. I was today successfully able to start the update process but was unable to do so as I was trying to install ROM Spl 1.43 and 1.48. However the good thing is that I was able to start it. My HD2 has SPL 1.42.0000 rom. I contacted HTC singapore and HTC India to provide me the rom but no help. Would you be able to tell me a location where I can download the official ROM SPL 1.42.0000 XE
    Vikas

  39. Hello I want to upgrade my HTC ROM through this method but mine is SPL 3.03 SPL Is it possible for me to follow this method to upgrade ?

  40. Hi Jayce

    Can you tell me what is the best Rom for HTC HD2. I am using now android 2.3.7
    ???

    Couple times I have white screen problem.
    thanks in advance.

  41. Hey Jayceooi 🙂 I need your help, I get the upgrade rom code error, the rom upgrade can’t go through, it’s because of the fact I don’t know what region my phone is from. How can I check which stock rom to install? I’ve tried many 🙁 Please help.

  42. Hi Jayce,

    Thanks for the guide. I tried to flash the energy rom (for WM) onto my HD2. I followed the steps you listed and at step 21, then I have the 3 color screening, and still holding the volume down key, it didn’t advance into “loading” mode. I held the volume key for minutes but nothing happened. What did I miss? Currently flashing from PC is not an option for me, therefore I try to flash the rom from the SD card. Thanks for helping!

    Xiang

  43. Hi Jayce,
    I had android installed on my HD2 and i needed to take my phone to service and i kind of need the warranty… I tried to do flash back win mobile like you showed in the guide, but the update failed. I downloaded the rom from htc and i get the 00028002 “not allow” error. And when I tried do do that via USB, the updater says that the vendor is unknown and also aborts. Is there anything I can do to make windows work, or can i install android back or do i have a brick now?
    Thank you!

  44. My HD2 is SPL 1.42.0000 XE. It didn’t even start upgrade and its says Error 002882 Not Allowed…how am I suppose to solve that? Is it because of mine was T-mobile? Please help.

  45. hi. i am having a hd2 which i purchased frm germany (t mobile) i was running android in it. i used android for 6 months it started giving me prob and then i installed rom 3.14 on it but error came and now my hd2 is jammed and it says “software update problem try again” tell meh smthing wot tu do??? 🙁 i am really tenssd 🙁

  46. hi jayce, just wanna ask you about my problem with my htc hd2. maybe ya have a fix for this.

    my htc hd2 is stuck at the pink stick together screen.

    i cant get my phone to work.

    maybe you can help me with this one. tnx in advance.

  47. Jayce!!!! I can’t thank u enough!!! After almost 2 yrs of following u here, I did it again! 😀 So happy! Thank you, thank you, thank you!!!
    Hmmm..I thought I destroyed my hd2 after trying all those roms & for some time I sticked to Muiu & last wk upgraded GB rom to Honeycomb but it failed me bigtime! I was really scared that I screwed up but I was wrong!

    Keep it up!!!
    Greetings fr the Philippines! =)

  48. Bonjour ou Bonsoir d’ailleurs :p Alors voilà je vous explique mon problème: C’est à propos de mon HTC HD2, il refuse de s’allumer !! En faite il s’allume mais reste bloquer sur l’écran d’accueil HTC avec R 2. 07. 51. 22~~ 2 G 15. 32. 50. 07U D 1. 66. 76641 . Et donc un ami m’a conseillé de le flasher et le problème c’est que je ne sais pas comment on fait cela.. Et j’aimerais bien avoir de votre aide pour refaire fonctionner correctement mon HTC s’il vous plait. Je vous remercie d’avance 🙂

  49. Jayce..i have a problem..i tried to upgrade the ROM..and now the phone stuck with the message “upgrade ROM code error’

  50. Hi Jayce,

    During the update it shows 000022800 something like that error

    HX-BC
    SPL-3.03.0000 XE
    MicroP(LED) 0×05
    microP(touch) 0x

    I have download right region ROM version, Please help me what can I do, If i try WWE, is does ok?

    I noticed my Windows mobile device doesn’t work.

  51. Hey I have Magdlr v1.11 installed on my phone. I had android boot through NAND, a ROM by DFT. It worked fine for many many months, but now my device is shot. My device won’t boot. I’m trying to see if I can return the phone to stock rom now but to no avail. Ive held the vol down key and power button, I’m brought to the multicolored screen. spl 2.08 HSPL CotullaHSPL. In the white section the phone reads Serial, when I connect USB, nothing happens. I’ve tried different USB CORDS but nothing works, it still reads serial. Which means that I cant connect computer to phone to flash back to stock rom. Romupdateutility doesn’t recognize a connected device…I have MAGDLR 1.11, it is somewhat unresponsive. USB FLASH MODE doesn’t work, it just hangs after selecting it. USB MOUNT is also unresponsive when selected. EVEN tetris doesn’t work…

    • Hi Abdias, is your HD2 USB port is still working? Can it still be charged?

      As for serial won’t turn to USB issue, you need to have Windows Mobile Device Center installed on Windows Vista / Windows 7 or ActiveSync installed on Windows XP.

  52. Yes, the USB port works fine, it can still charge. The device can maintain charge when the battery is pulled and then put back, and then plugging in USB charger. Only thing is that it won’t hold charge if I press the power button after doing that cycle with the battery. Should I press the power button, the onscreen logos will then go into a constant loop never getting pass the DFT logo.

    I have Windows 7, Windows Mobile DEvice Center is installed on this machine. When I plug in my HD2, I receive the message saying USB DEVICE NOT RECOGNIZED. I’m at my wits end here with this today.

  53. Hi Jayce,

    I’ve got a problem with my HTC HD2, that I can’t fix. I used to have an Android ICS version running on my HD2, but there where a few buggs so I decided to reinstall WM6.5
    The first steps went well, but now everything on my HD2 is deleted.
    It won’t start when I push the on-button. It does react when I connect it to the charger/USB, it keeps showing the HTC logo. When I boot my HD2 I’have the SPL-2.08.HSPL R.G.B.W. screen, but there is no further loading..

    Can you help me?

  54. Yes I did, but it didn’t worked.. There has been soms progress 😀 I finally been able to load it again into MAGLDR. So the final step is to flash a good ROM, isn’t it? I’ll try again and let you know.
    Thanks anyway!

  55. hi jecee,namaste-i have htc hd2 6.5. i want to know shall i keep 6.5 or change it to win 7 or android?which is best?pl.guide me.i am confused.

      • hi,thanks for guiding.
        now there is one problem.i tried updating for androd.upgrading rom some thing got wrong in hspl3_pkg [dft]. on phone there is a message”your os rom isn’t customized for your hardware.pl.reflash the proper rom code or contact the service center” i tried 2nd tiime.message came i [dft]have hacked it.
        NOW WHAT SHOULD I DO?PLEASE,PLEASE HELP ME.MY SON HAS GIFTED ME THIS PHONE.I DON’T WANT TO LOOSE IT.

  56. hi,thanks for replying so fast.
    i instaledHSPL3_PKG.
    it is a dft rom instoler.i selected 2.80………..hspl in that .

  57. hi,i tried instoling android .downloaded-dft hardspl3 by bepe and cotulla 21.06.2010-suported by all leo types[dft hspl for leo by bepe and cotulla 2010,DFT HSPL3 FOR HTC LEO]

  58. hi
    as u mentioned in mail link to upgrade rom with sd card- leoimg.nbh file -[1]from where to downloa leoimg.nbh [2]renaming file to leoimg.nbh -computer adds 1 or 2 behind it.will it do? [3]coping renamed file shall i keep both leoimg.nbh or replce?

  59. hi,
    to install android i am tring link u sugested-https://www.jayceooi.com/2011/08/15/how-to-install-cwm-nand-android-on-htc-hd2-video/
    but as my mobile dos’t work,which link will be beter for me?

  60. hspl done.radio dos’t work.as runed by administrater-ticked ok-then assesing pda phone-error comes check utility.

  61. hi
    u asked what dos not work.my mobile -i can’t start.as i said on 20/may there is a message on mobile screen on starting it-”your os rom isn’t customized for your hardware.pl.reflash the proper rom code or contact the service center” i
    further i can’t oprate mobil.

  62. hi jay,

    i send you an email regarding sd card but i guess you don’t needs to asnwer that, i just want to say thank you for the great post. last whole week was on your side , trying to boot window 7 and done it and after that i installed official htc hd2 back again, without your post its must be impossible.

    regards
    zubair

    keep up the good work as i am moving to HD7. 😛

  63. hi jayce.
    i haresed u lot last 10 days.but i saw that u were ansering without any flustration.u r guidence is very clear,to the point,explaning very well in links,,in detail.i finaly instaled ics android.its good,easy,good batrey life.
    i would like to thank u heartly.i am realy surprised that still in this time ther are some who help mobile users like me.due to u r upgrdetion i am proude to use my htc hd2.whitch is a gift to me from my son.
    once again thanks & congrats foe engagement.u r pre weding picture s are excelent.
    lastly is ther any thing good in android after ics android?

  64. hi
    google play store installs apps in phone memory.phone has 550mb.memory full error comes.how to install apps directly on sd card?

  65. hi,
    i tried this-https://www.jayceooi.com/2012/02/21/download-install-nexushd2-android-4-0-3-ics-cm9-rom-for-htc-hd2/
    i delited nesus hd2 android 4.0.3ics-beta 10 from sd card.copied nexushd2-android-4-0-3-ics-cm9-rom-for-htc-hd2/ from xda to sd card.
    but after ad recovery un zip from sd card-no files in sd card comes.what to do?

  66. hi,
    this means after deliting -nesus hd2 android 4.0.3 ics-beta 10 from sd card,i have to copy zip of nexushd2-android-4-0-3-ics-cm9-rom-for-htc-hd2/ to sd card. no need to do any thing.?without unzip how will nexushd2-android-4-0-3-ics-cm9-rom-for-htc-hd2/ work?

  67. hi, thks,
    i.e.i have to install all
    -SPL-2.08.HSPL
    Radio that support 576 MB RAM
    DFT MAGLDR Bootloader v1.13
    ClockworkMod Recovery v1.3
    again or skip all this steps. then follow -How to Install Android 4.0 Ice Cream Sandwich on HTC HD2? (Video) process for install zip file –nexushd2-android-4-0-3-ics-cm9-rom-for-htc-hd2/

    • No need to reinstall all.
      Install CWM layout size that match to new Android ROM. Check ROM requirement at XDA website.
      Finally, install Android ROM.

  68. hi
    finali i have NexusHD2 Android 4.0 Ice Cream Sandwich Beta10 NAND ROM for HTC HD2.
    but there is one problem.phone has been slowed down & cemara +gallary not responding.what to do?

  69. ok,thanks lot for reply.will meet again when such metirial will be avaleble.if posible pl.do inform me if u see some thing like my choice..thanks again.u r very good .if come to india pl.inform me.we will have good time .i am in gujrat .india.

  70. hi jayce,
    i am running ics cm9 since many days.good perfomence.thanks alot..how can i know about its upgradeation?

  71. hi jayce
    i have problem with my htc hd2 that stack at the htc logo and i have follow the step you give out
    by the sd method but it still show me error 000028002 and upgrade ROM code error pls try agian
    what can i do again pls help me am out of phone

  72. hi jayce
    i have got the upgrade ROM from HTC AUSTRALIA and it work thank
    pls help me which android should i use now for my phone

    OS v 5.2.21869(21869.0.85)
    Manila v2.5.201431.1
    ROM v1.72.841.0(82124)wwe
    pls give me the right file to use i dnt want to stack my phone again pls help me

  73. Hi Jayce,

    I was upgrade HSPL from 2.08 to 3.03
    but, there’s an error, “Upgrade ROM code Error, please try again”
    now, when I install from SD Card, the screen just show “loading….”, no action again
    I try other leoimg.nbh, the result still same.
    I try to install via usb, the text stil “Serial” in tri-color mode.

    Please show me, what I must to do.

    Thanx.

    (sorry my English bad)

  74. Hi,
    I use htc HD2 (not T Mobile) with Android 2.3.5 and it’s work great.
    I want to change the Android to 4.0.
    I only know to do 2 steps:
    1. Wipe delvic cath.
    2. Install ZIP from SD card.
    I do that steps when I want to reinstall the Android.
    How can I install new Android?
    Can I download the ZIP file from your website, insert it to the SD card and install it like 2 steps I know or I need more steps to do?

    Thank’s.
    Moshe

  75. Hi~ Jayce
    can you give me your facebook? because i got some problem about my phone need to share some picture to let you know
    please ~ Agent need help

LEAVE A REPLY

Please enter your comment!
Please enter your name here