How to Install ClockworkMod Recovery on HTC HD2? (Video)

By
Jayce Ooi
-
Last modified on

HTC HD2 is getting more like a native Android phone each day. We are able to flash NAND Android through PC. And with ClockworkMod Recovery, we can flash NAND Android on HTC HD2 through SD card without PC. Further more, we can flash ROM in update.zip format, backup and restore ROM using Nandroid. Do read this post for its usage and more information about ClockworkMod Recovery.

Note – by installing ClockworkMod Recovery, your existing NAND Android ROM will be deleted. So everything on your phone is gone…

Prerequisites

  • HSPL3 ~ SPL-2.08.HSPL
  • Radio that support 576 RAM
  • DFT MAGLDR Bootloader

Please make sure that you have all the prerequisites installed. If you don’t have HSPL3, please install it by follow the guide ~ How to Install HSPL3 on HTC HD2? (Video). And install radio ROM 2.15 with this guide ~ How to Install Custom Radio ROM on HTC HD2? (Video). Finally, install DFT MAGLDR Bootloader with this guide ~ How to Install MAGLDR on HTC HD2? (Video).

Step by Step Guide

  1. Power on your phone and don’t let go power button.
  2. DFT MAGLDR Bootloader will be loaded.
  3. Use volume down button to go down to 3. USB MassStg.
  4. Then press call button to enter USB Mass Storage mode.
  5. Connect USB cable from PC to phone.
  6. At PC, open Removable Disk (SD card storage).
  7. Create a temp folder.
  8. Open ClockworkMod-Recovery-v1.0.zip with 7-Zip.
  9. Copy everything to temp folder.
  10. Enter temp folder.
  11. Enter copy_to_sd_root folder.
  12. Copy initrd.gz and zImage files to SD card root level.
  13. Then disconnect USB cable from phone.
  14. Press power button to go back.
  15. Use volume up button to go up to 9. Reset.
  16. Then press call button.
  17. Press power button and don’t let go.
  18. DFT MAGLDR Bootloader will be loaded.
  19. Use volume down button to go down to 4. USB Flasher.
  20. Then press call button to load Android Flasher mode.
  21. Connect USB cable from PC to phone.
  22. At PC, right click on DAF and select ‘Run as administrator’.
  23. Click ‘Yes’ if User Access Control prompt up.
  24. Follow onscreen instructions to install.
  25. Phone will be rebooted after installation finished.
  26. DFT MAGLDR Bootloader will be loaded then.
  27. Disconnect USB cable from phone.
  28. Press call button to load 1. Boot AD SD.
  29. ClockworkMod Recovery will be loaded then.
  30. That’s all.

Note – ClockworkMod Recovery v1.0 was used in the video.

Download ClockworkMod Recovery v1.2 here.

Well done… Continue with this post ~ How to Install NAND Android on HTC HD2 with ClockworkMod Recovery? (Video)

RELATED ARTICLESMORE FROM AUTHOR

314 COMMENTS

  2. thanks… which NAND ROM are u using now? Still solid, is battery life better than any SD ROM?
    What Radio Version needed? Mine is 2.12 with Stock WME 1.66.. shud I reflash new/higher version? Thanks in advance for the help… I initially quite reluctant to go for NAND coz worries to brick my phone if i miss out the steps but since NAND ROM came, I dont see anymore new SD coming or being maintained.. all dev are leaving SD or RAM version now i guess…

    • I am using JDMS Ultimate right now. Battery life is better for sure. I think 2.12 radio should work but I am using 2.15. But you definitely need HSPL3.

      Bricking HD2? How many HD2 users did you see their HD2 brick? Actually, as long as you have HSPL3 install properly, your HD2 is safe from becoming brick. You can flash WinMo, Android and WP7 with it. Just load into its bootloader and start all over again and again…

  3. i have followed all the steps, but whenever i click on the 1st option on the MAGLDR 1.11, its given error failed and returning back to the options. what should i do.

  4. ever since i installed on my hd2 it wont recognize my hd2 since im trying to flash other programs into my phone it will charge and all but when i go to the red blue and green screen it stays at serial it wont read my usb also in magldr i cant flash anything anymore and im trying to flash wp7 onto my hd2 please help

      • got a different laptop i have already removed all the safety precautions for my usb ports and all but it still wont work i might have to try something else and yes i already have magldr 1.11 i was just trying to upgrade to 1.13 to get wp7 but when i downloaded the clockwork recovery i accidently installed the newest version before installing magldr i think thats where i went wrong and now it wont even run clockwork at all

      • ok well i tried a different hd2 phone and the same thing happened is there anything i can do to make it work is there some sort of thing i have to do to my laptop or some steps i have to go through in order for it to work im guessing it has something to do with the firewall but i turned it off and it still had no effect

  5. yes i do when my phone is on regular without the magldr it charges and all but thats it but when i go into it it wont recognize it i hear the sound for when i plug it in but nothing show on my phone like when i go into the option 4. usb flasher and run the wp7 program or a custom radio to return it to original i get an error that says cant read phone or palm device to make sure my usb is connected im sure it has something to do with acces to my usb through my firewall im just not that oriented on computers dont really know how to acces it can you please post a link if possible

      • windows 7. it has something to do with it im sure i went to another laptop that my friend has and everything works i was able to install everything properly i guess i just has to find a way to install the driver to make it work for the next install i want to do cause i dont feel like using somebody elses laptop to do my work so please if you know how to fix this problem a link would be very much appreciated

  6. hEY jayce i installed clockmod with MAGLDR 1.13 and i m trying to switch from DFT launcher to clockmod sd .zip file update. Im trying to update Mdjcyanogen mod 7 to Typhoon cm7 v.1.6 and when i do the update from clockwork mod i get load screen with the Android logo and then the device shut down and restart over and over again . Can you please help me with this problem. I can only flash the rom using DTF flasher directly from the computer using usb flasher. thank you

  7. Any rom that I tried using threw clockworkmod using zip and sd card does the same thing. After installation it boots up and then I c the rom android logo and it restart over and over again

  8. 24. Follow onscreen instructions to install.
    25. Phone will be rebooted after installation finished.

    i try to install DAF but it appear usb int fail..so how should i do?
    at this time i cannot open back my wm 6.5.

      • i have the same issue. it goes to “GO Go GO” then it reboots and the phone starts to boot and then it goes straight to that “Go Go Go” page again. Just finished all the steps and cant figure why. I see no error details

          • Yes, i installed everything, step by step according to the video. Its already fixed tho, i took it to some guy on CL and he fixed it within a matter of minutes. Now im runnin 2.3 Gingerbread. Too bad i dont have the glory of doing it myself successfully, but hey, im running Gingerbread! B)

          • I have the same issue but I did not installed NAND android, I did the whole procedure having W6.5….

            Should I just go to NAND installation video and do the whole thing to fix this?

            thanks !!!

  11. I am stuck on running DAF with the following error, my HD2 is now unusable, help!!!

    Error Description: Config load failed.
    Info: .\RSPL\RSPL.cpp (725)

    Error Description: CONFIG: can’t open config file
    Info: .\RSPL\RSPL.cpp (304)

    I am doing the install on Windows 7 with HSPL3_PKG, DFT_LEO_MGLDR113_DAF and Radio_Leo_2.15.50.14.

  14. Hello I need help I did every step but i am stuck in 29
    ClockworkMod Recovery will be loaded then

    Clock work doesn’t load up for some reason and just satys as

    ANDROID LOAD AT 180000000
    from microSD
    load zImage
    K: \zImage
    ect…

    GO! GO! GO!

    Can you please help me i am almost done with everything 🙂

  15. Hello Jayce,

    I am stuck on step 22. All the steps until now were successfull. When I run the DAF.exe file it starts then after sometime it gives error “fail to Initialize USB”.

    Kinldy plzzzz help, I am stuck here!!!

  17. Wow I think you are amazing for answering all these questions. My problem seems so simple, yet I’m not smart enough to find the answer. I can’t get windows mobile center or window activesync to detect my phone thus causing DAF.exe to not connect. I have tried everything and searched everywhere to no avial. I’ve tried my XP desktop with activesync and mobile center with my windows 7 PC. I initially installed a nand rom on my HD2 when I have vista on my PC. Now that nothing will connect I can’t change anything up on the HD2 especially to put Clockwork on. Any suggestions would be appreciated. Thanks!

  18. yeah this isn’t working for me. I’ve followed every step but when i get to step 28 all it says is ” SD Kernel Open Failed” and takes me back to the main menu. What am I doing wrong jayce

  21. Hey you!

    It’s works great for me, thanks for that! =)
    But… i tried another Custom Rom, installed by DAF or as .zip from SD-Card, that doesen’t work for me… dow you have another Rom from me? 😉

    Johnnny

  22. Hey I tried everything you said then I selected ad recovery and it gets stuck at 123456 GO GO GO!.I’m using BOYPPC-SHIFTPDA GINGER 2.3.4 HoneyComB

  23. hi , i tired to do the clockworkmod i follow every steps ended up it keep going to clockworkmod recovery v3.0.0.5 how am i able to re do everything and go back to my normal windows… tks… im using htc hd2

  26. I had tried the whole process H/ever mine was stuck at the HTC logo.. i read the comment and someone said to reformat the SD card and repeat this step. I tried but now it stuck at the “GO GO GO”.. able help ASAP!! TY in advance

  27. got one problem, the files that need 2 be copied, initrd.gz and zImage, ive got initrd without gz, downloaded from here… and at the end of the instalation an error occured, something about sd-card… what should i do ?

  29. I deleted all the trash off my SD card but in boot settings I can still see all the folders, when I try to boot of the SD card, i can briefly see the zimage file, but then it pops back to the menu, any ideas, maybe reformat the card? what do you use..

    I am using sMAGLDR V1.11

  30. I have done till step 21 and for 22 i dont have “administrator” rights on my laptop. Secondly I am getting the 12345 GO GO GO screen on reboot. It is not booting to mgldr screen where i can connect to pc via usb. could yu pls help me.. thx

  31. whenever I try to continue installation , the following msg keep appear, plz help as my HD2 is dead and I can’t get back to my old OS or even try the Android. plzzzzzzzzzzzzzzz help

    E:Can’t find misc
    E:failed to find “cache” partition to mount at “/cache”
    E:Can’t mount /cache/recovery/command
    E:Can’t find misc
    E:failed to find “cache” partition to mount at “/cache”
    E:Can’t mount /cache/recovery/log
    E:Can’t open /cache/recovery/log
    E:failed to find “cache” partition to mount at “/cache”
    E:Can’t mount /cache/recovery/latest_log
    E:Can’t open /cache/recovery/latest_log
    E:Can’t find misc
    E:failed to find “cache” partition to mount at “/cache”

      • I was in step nr 17. after I rebooted the device and hold down power , then went to choice nr 4 then whenever I try to enter the usb flasher, it keep stating wait usb wait usb,. so I rebooted once more. and entered to choice nr 3, and put copy from the JawsNandRec1.1 zip file in a trial to install it, after that I wen to choice nr 1 to boot from AD SD, then install zip from sd card. it then when the msg appeared.

        I was using xp but now im using win7. with admin permision , ad when ever I try to install the DFT .it stops with error nr 723, so I can’t install the DFT nor the Android, plz help

    • Hello Tarek,

      I can try to help you get back to your old Windows OS if your using a HTC HD2 T8585 phone.

      ***Before attempting this, format your micro sd card to fat 32. If your sd card is not recognized or cant be formatted go to: https://www.sdcard.org/downloads/formatter_3 and download the SD card formatted suited for your computer (windows/mac). With the use of a sd card adapter the program should help you format your sd card. After thats done, place the formatted SD card in your phone SD slot.

      Now follow this instructions:
      1) Go to this website: http://forum.xda-developers.com/showthread.php?t=623283
      2) Download any of the 3.14.xxx.x ROMS in your country preference.
      3) You should have downloaded something that like “RUU_Leo_S_HTC_……….” into your computer.
      4) Drag the ROM to your desktop
      5) Make sure your HTC phone is unplugged
      6) Hold the volume button down and hold the power button together
      7) This should lead you to a red, green, blue, and white screen with words “serial”
      8) Then plug your usb cord to the phone to your computer. The words should change from “serial” —-> “USB”
      9) Go to your desktop and click on the downloaded ROM and install it.
      10) The ROM should recognize your HTC phone and restore its operating system back to Windows.

      I hope this helps you!

  35. i’ve installee magldr and clockwork sucessfully but after installing roms from sd card it just keep on restarting again and again using coredroid any tips why?

  37. oh do i need to partition sd card? havent done that its my first time doing this nand android thing Start thinking wanna try it for a change. so if ever how can i partition may sd card? tnxs

  39. Hello Jayce,
    during installation of clockwork, after selecting usb flasher mode option, the phone is not being
    detected by the computer when i connect with it? give any solution?

  41. Hey Jayce.
    I have been trying to load android to HD2. however, the phone freezes at the stage when zImage and initrd.gz have been loaded. The screen does not change to the next stage. I have installed all the other requirements.

    what could be the problem?

  42. ooh yaah. There, when the phone is switched on. there is a screen that appears and was able to see…….” NAND Kernel open failed”

  44. hi
    i have done all the above steps but the problem is that when i’m in the 21st step the ” Android Flasher Mode ..” appears but the computer doesn’t recognize it as a drive. so i can not have DAF synchronization. I have to add that the mobile phone is on the devices list.

  46. i am using magldr 1.13. i placed the files in the sd card then usb flasher then executed daf. once it completed, it rebooted then when i clicked boot ad sd it says sd kernel open failed. what do i do

  47. Hi Jayce!
    I was wondering if i can flash android builds made for the desire HD on my HD2 with Clockwork Recovery. Is it possible?
    Can you recommend some android builds for the HD2 that are as close to the stock desire HD ROM as possible?
    Thanks..

  49. Hi, i meet the problem after flash, when i try select boot AD SD then got an error mess, “SD initrd open failed” then i can’t go into clockword mod recovery…
    really thx….

  50. Dear JaYce,
    few info from you. I have installed MAGLDR 1.13 and JDMS on my t-mobile Htc Hd2, I would like ta ask you is that my mobile model number is shown as HTC BRAVO and Android version as 2.2.1. Kindly let me know if everything is ok or somthing wrong, also if can upgrade to something better
    thank you for the services
    raj

  51. Hi Jayce

    I’m following your method, but when I press the #4 USB FLASHER, it take so long for the “wait USB.. USB(the second word USB, I mean) so my question is that, Is there any wrong with my device? many thanks.

  52. Hi jayce
    I have installed CWM trough your skipped method, I go directly from MAGDLR bootloader and select #8. Ad recovery. And on my SD card was CWR and NexusHD (I downloaded fromyour link). Overall I did it successfully but thoroughly SD card. But some thing still leave my problem.
    On the CWM loader its mention as below:
    E: failed to find “catche” partition to mount at”…/catche
    E: cant mount /cache /recovery/last_log
    E: can’t open /catche /recovery/last_log
    E: cant find misc
    E: Failed to find cache partition to mount at”…./cache
    No files found
    Installing :/sdcard/nexusHD2 –gingerbread_v3.1
    a.nand_(android-2.3.6)zip
    E: cant find misc
    Finding update package
    Opening update package
    Installing update
    Welcome to nexusHD2-gingerbread v3.1a NAND
    Formatting boot….
    Formatting system…
    Copying files to system
    Copying zimage and intitrd.gz to boot
    All done!
    Install from sdcard complete
    So far, i do reboot system it take to MAGDLR bootloader. Do you have any suggestion on this issue?? Many thanks

  53. my sd card’s of 4 gb but now its showing just of199 MB.. i installed WPH 7 a day back and then installed android immediately after dat.. help please

  54. first of all, the moment i switch my phone on, it loads boot menu !! (without holding it for long)
    secondly, after d 16th step, it automatically loads ClockworkMod Recovery !! my phones screwed up !! please suggest me how should i start it normally !! please !! thanks !! 😀

  55. Hi,

    because WP 7 didnt worked out following your tutorial i tried android as well.
    But i dont get a connection to the pc when switching to massstorage mode…
    Any ideas ?

  56. Hi jayce

    I have tried to install clockworkmod following your guided, all are successfull installation, but I have a question, on the Press call button to load 1. Boot AD SD. then ClockworkMod Recovery should not loaded, what’s wrong???

  57. Hi Jayce 🙂
    Just completed this thing until I reached something annoying:$
    I done everything, until I got to the stage I should pick the first option…
    I have done it all fine (except from one stage in the beginning, I deleted everything from the sd card cause it didn’t let me start the magldr, it started a logo of htc in green and got stuck).
    I click the first option and nothing happens!
    Thank for advance, Eyal.
    Skype – kloxic

  59. Hi Jayce

    I’m following your method, but when I press the #4 USB FLASHER, and runing DAF

    Error Description: USB init failed
    Info: .\RSPL\RSPL.cpp (736)

    Error Desciption: EnterBootloader missing
    info: .\RSPL\Bootloader.cpp (176)

    Windows 7 (64bit) – HD2

    many thanks.

  60. Jayce, Thank you so much for publishing a step-by-step procedure for installing android on htc-hd2. but ice cream sandwich was a loser release so i had to get back to gingerbread. Thanks for your support.

  61. I have done everything in the video but when i press boot ad sd i says SD kernel open failed what do i do am using the 1.0 clockwork recovery and aMAGDLR v1.12 Build: Feb 1 2011 03:46:07

  62. I tried several time with your tut. I notice I dont get auto reboot ie.step no.25 on your tut. I have to remove the batt. to get to magldr main menu. and still when tried to AD Sd i am getting 1Efatal hit1
    pls help and can you kindly tell me will the battery be charged at magldr menu state.. coz i been playing for couple of days hope my battery dont’ ranout below 50%

    reg
    sundar

  63. hi.. first i installed windows 7 on my htc hd2..then i wanted to install clockwordmod recovery..my fone got hanged while installing so i canceled that..now when i switch on my fone the loads into boot loader..there is no windows in my fone now..so what shall i do??
    im stuck.. idont know what to do??
    please hel me

  65. i only find a winrar archive file in the “copy to sd root” folder names initrd no .gz, and then a z image? wat do i do? do i still put in the sd card?

  67. me again….Ok as Turn my cell on it goes rite into aMAGLDR V1.11( its says in red NAND YAFFS2 BOOT MOUNT FAILED in red writing) then goes into the magloader screen 1-10. Im following the steps and get to step 6 (@ PC open removable disk-SD card storage) . When I plug Cell to PC it does nothing…How do I get to the removable disk screen? & Step 12 how do I copy initrdiz& zimage file to SD ROOT Level? What is SD Level and how to find it? Is there anyone I can pay to do this because i cant seem to get it rite..BUt im trying

  69. Hey i am not able to load the DFT MAGLDR. even tough i am holding the power button and not letting it go…. still the phone is getting started and shows windows….. plz help.
    thank you

  71. Hi, I’m trying to download your 7-zip app from your website but it’s not working.
    I have a Compaq Presario with Windows 7. Are there any firewall settings I need to disable in order to complete the installation process?

    Any help with this will be most appreciative. Thanks in advance.

    -big boy big

  72. Actually, this link appears at random on several of your sites. I’ll email the link to ya when I get a chance. For now, I’m going to bed…later. Zzzzzzz

  73. im stuck at step 12, mine shows initrd.gz as winrar file , instead of just a file.

    tried both ways to extract and copy over and tried copy over as winrar. none work, any help?

  74. hello..i having a bit of a problem here ..i followed all of your instructions but the same thing happen after clicking the “8:AD recovery.then..blahblahblahblah…then after i reboot it..it goes back to this aMAGLRD v1.13

  76. Hey Jayce, thanks for all your help I’ve followed everything from your forum but on this one I am stuck. I followed all the steps. I connected my phone and the USB…..USB did showed, so thats good. Then I opened DAF file and ran it as administrator, it takes quite a while and this appears…
    Error Description: USB init failed
    Info: .\RSPL\RSPL.cpp (723)
    … What can I do? Thanks for all your help.

  77. Hi Jayce,

    This is my very first time to root or is it flash.. anyway, because of your uber helpful video guides, i was able to install HSPL3 ~ SPL-2.08.HSPL, radio ROM 2.15 and DFT MAGLDR Bootloader. Then, I started on your video for ClockworkMod Recovery… However, when I reached these steps:

    15. Use volume up button to go up to 9. Reset.
    16. Then press call button.
    17. Press power button and don’t let go.

    I did 15 & 16 properly, but i wasn’t able to do 17. it just rebooted on it’s own. So, i redid 15 & 16 and this time, i pressed 17. Unfortunately, it must’ve been a mistake because I’m getting the following messages:

    ClockworkMod Recovery v3.0.0.5
    E:Can’t find misc
    E:failed to find “cache” partition to mount at “/cache”
    E:Can’t mount /cache/recovery/command
    E:Can’t find misc
    E:failed to find “cache” partition to mount at “/cache”
    E:Can’t mount /cache/recovery/log
    E:Can’t open /cache/recovery/log
    E:failed to find “cache” partition to mount at “/cache”
    E:Can’t mount /cache/recovery/last_log
    E:Can’t open /cache/recovery/last_log
    E:Can’t find misc
    E:failed to find “cache” partition to mount at “/cache”

    i also get some choices at the very top of the screen:
    – reboot system now
    – apply update from sdcard
    – wipe data/factory reset
    – wipe cache partition
    – install zip from sdcard
    – backup and restore
    – mounts and storage
    – advanced

    I’m afraid to try and select an option for fear of compounding on my mistake.. Can you please tell me how to fix this? Please please?

    Thank you!

      • Hi Jayce.

        Thank you for the quick reply. Thrilled to be able to get an updated link.

        Um, but i think i need to erase the old one first since it’s corrupted. when i tried to install HSPL4, it just displayed the above information:

        ClockworkMod Recovery v3.0.0.5
        E:Can’t find misc
        E:failed to find “cache” partition to mount at “/cache”
        E:Can’t mount /cache/recovery/command
        E:Can’t find misc
        E:failed to find “cache” partition to mount at “/cache”
        E:Can’t mount /cache/recovery/log
        E:Can’t open /cache/recovery/log
        E:failed to find “cache” partition to mount at “/cache”
        E:Can’t mount /cache/recovery/last_log
        E:Can’t open /cache/recovery/last_log
        E:Can’t find misc
        E:failed to find “cache” partition to mount at “/cache”

        i was wondering if wipe cache partition or wipe data/factory reset erase the previous CWM so i can start afresh or something? my apologies if i am bothering you with this but i hope u would be able to shed some light as to how to restore things so i can begin again at installation of HSPL4..

        Thank you!
        Lisa

        • Hi Lisa, you should be able to install HSPL as it has nothing to do with CWM. If really can’t, I have no idea then. Try to consult others at XDA website.

  78. i did a wipe data/factory reset and wipe cache partition and the following messages popped up:

    Wiping data…
    Formatting /data…
    E:format_volume: no MTC partition “userdata”
    Formatting /cache…
    E:format_volume: no MTC partition “cache”
    Formatting /sd-ext…
    No app2sd partition found. Skipping format of /sd-ext.
    Formatting /sdcard/.android_secure…
    Data wipe complete.

    Then the whole slew that i posted before reappears.

    Does this give any information that might point as to where the prob is?

    If it doesn’t, then I thank you for your time, and I guess i’ll try my luck at xda ^^;

      • Jayce, U r the boos…my hd2 had wp7. Last night i wipe it using task29…thn i install Hspl thn Radio 2.15. thn Magldr… but Magldr not instaling showing some error though phn entering bootloader. After that i copied 4ext(unzip) to Sd & reboot. Mgldr open & went to Service & Add Sd dir to locate 4ext thn reboot it go to ClkRecovery thn i create partition Sd > a. 768M sd-ext b. 512M ext2 c. 256 swap &rest part d. Fat . After doing ths i copied a Muiu custom JB Rom .zip to Sd & install it. After instal it want reboot & reboot my hd2 but the problem is its booting again & again to ClkRecovery insted of OS…wy? Wat can be done? but if i install only PA-leo’s JB in same way it work & go through OS ,but its too much buggy…whn i try to instal other rom(muiu,cm10) Clk showing some error…
        E:failed to find “cache” partition to mount at “/cache”
        E:Can’t mount /cache/recovery/log
        Need hlp…some1 said it hpn for Sboot partition…but i didnt find any Sboot partition Option in ClockModRec…how to create it? I copied to Sd & tried to install Flash_Sboot.zip but it aborted & saying…
        E:failed to find “cache” partition to mount at “/cache” …

  79. hi,i m tring 2 rom on hd2by clockworkmod recovery,bt always fails at BOOt AD SD.after this line,after booting from AD SD,
    k:/zimage
    SD kernel open failed

    i dnt know wht 2 do.the sd card i m using is nt recomended by htc on hd2,bt its working otherwise fine.i am already running nand andriod rom bt nt by cwm recovery.using hspl,radio and magldr n thn installed rom.bt i want to using cmw roms,for rooting my hd2.plz help me as i am following all steps.
    thnx

  80. i have a problem i did everything to instal android to hd2 but when i was whatching last vidie there i have to download the Jaws-MIUI base on MIUI 18-12 [Kernel: prj0.3] NAND ZIP ROM + DATA.IMG, but when i try to do that they say that there no file like this, and now my phone dont have windos, but dont have android too….. Can u help me?

    P.S. Sorry for my english.

  81. I have installed ClockwordMod Recovery v1.3 250 mb, but i have several errors..
    First: Readme.txt for this release is missing.
    and then i click next and it says this: An error has occurred
    Read below for more information

    Error Description: Config load failed.
    Info: .\RSPL\RSPL.cpp (725)

    Error Description: CONFIG: can’t open config file
    Info: .\RSPL\RSPL.cpp (304)

    I already have the other files i need, its just this one that doesn’t really work. How come? Is it otherwise possible for me to use v1.2?

  84. Hi, i had problem during the cwm recovery installation
    When I do the step ” 22. At PC, right click on DAF and select ‘Run as administrator’. ” it wont install, i only get this message : Error happen
    Read below for more information

    Error Description: USB init failed
    Info: .RSPLRSPL.cpp (723)

    what should i do? thanks

  86. i’ve done everything corectly but now at the part “AD Recovery” it says “No boot sources”
    Also, i cant use the phone. when i turn it just says
    booting android from nand
    ….
    nand kernel open failed.
    Please help me I need phone, i’m confused, why won’t he turn on normally? 🙁
    Thanks so much for replys.

  91. Hey,
    I have a problem: when I do boot AD SD it says: Sd initrd open failed.
    And my laptop says I have a initrd file and not initrd.gz? does that matter?
    Help please?

  92. hello sir,

    i have…..CM9ight_leo_v1.1a_div2

    kernel version 2.6.32-ics_tytung_HWA_r3
    tytung@ubuntu

    baseband version- 15.34.50.07u_2.08.50.05

    CyanogenMod version 9-20120609-leo(unofficial)

    build no – IMM76L (nexusHD2-ICS-CM9_HWA v 2.3)

    i am running out of internal memory so can u plz help me out with this problem

    Also i am new to this phone and i dont knw much about these concepts so the simple steps are preferable.

    your help will be relief
    thnk u

  95. hey, i successfully installed hp3, updated radio as well as magldr however after installation of magldr my phone is unable to reboot… what should I do?????????????? I am trying to install clockmode recovery

LEAVE A REPLY

Please enter your comment!
Please enter your name here