I thought that I can run away from HSPL3 after getting Android 2.2 Froyo running on official HTC HD2 3.14 ROM. But I was wrong. The latest NAND Android build requires HSPL3. So here is the video and step by step guide to install HSPL3 on HTC HD2.
Prerequisites
- Windows Mobile Device Center installed on Windows Vista / Windows 7 or
- ActiveSync installed on Windows XP
- You must have any SPL version from this list on your device:
- SPL 1.42.0000
- SPL 1.62.0000
- SPL 1.66.0000
- SPL 2.07.0000
- SPL 2.08.0000
- SPL 2.10.0000
You should have this SPL version unless you are using the latest 3.14 ROM with SPL 3.03.0000. No worry, just downgrade your Windows Mobile ROM from v3.14 to v1.66 will do. Download HTC HD2 v1.66 ROM. Then follow this guide ~ How to upgrade Windows Mobile ROM on HTC HD2? (Video) to downgrade your phone from SPL 3.03.0000 to SPL 1.42.000.
Step by Step Guide
- Power off your phone.
- Press volume down button (don’t let go) and power on your phone.
- It will load into bootloader.
- You should get ‘Red, Green, Blue and White’ screen with SPL-1.42.
- Take off the battery.
- Power on your phone.
- Connect USB cable from PC to phone after Windows Mobile loaded.
- Select ‘ActiveSync’ and click ‘Done’.
- Open HSPL3_PKG.zip with 7-Zip.
- Copy HSPL3_PKG.exe to desktop.
- Execute HSPL3_PKG.
- Follow onscreen instructions to install.
- Click ‘Yes’ if User Access Control prompt up.
- Bootloader will be loaded with USB status during starting of installation.
- Select ‘2.08.HSPL’ to install.
- After installation, you should see ‘We hacked it!’ on your phone.
- Click on ‘Yes’ and your phone should be rebooted and load into Windows Mobile.
- Disconnect USB cable from phone.
- To verify, power off your phone.
- Press volume down button (don’t let go) and power on your phone.
- It will load into bootloader.
- You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
- That’s all.
Download HSPL3 here.
thank you so much it work very good
keep up the good work
…..
but can we but back WM 6.5 and how
Install HSPL3 does not remove Windows Mobile.
no i need your help to run the WM 6.5 back on me htc hd2
will you please help
thanks
You are on NAND Android now? If yes, just install official Windows Mobile ROM will do.
Hello Joyce, I am very sorry for disturbing u again… I think I am totally lost now, i was going to install hspl3 before but i have already have one of ur listed spl on my hd2 which is SPL 2.10.0000 do i still need to install the hspl3? pls help me again.
Yes, you need one of the SPL above to install HSPL3.
Thank you very much… u the best man….. i want to run android from my sd card and see how the battery life is gonna be before getting rid of window.. do i just copy it to my sd and run it? thank you in advance
Yes, just copy it to SD card will do. But you need to upgrade to official HTC HD2 ROM v3.14 first. – https://www.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
Thank you very much again… on reading the article, you said it is not meant for HTC US Tmobile version… I’m in US with Tmobile and i just installed hspl3 on my hd2 right now.
I have just upgraded my radio to 2.15 also too, does it mean i have to install the offical b4 i can run it on my sd card? or not meant for US tmobile?
Having HSPL3 + 2.15 radio are good to run SD card Android.
how can I install HSPL3 when I have istalled MAGLDR 1.11?
Why do you need to install HSPL3 since you already have MAGLDR installed?
i’m sorry I read rong, but how do I get SPL 3.03 when I allready have 2.08?
I can’t install it when I have MAGLDR.
Just install official Windows Mobile ROM will remove it. https://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
can it work with tmobile usa? can i go back to w.m if il have to?
Yes, should be. Install HSPL3 will not replace your Windows Mobile.
hi i can’t get the point
now my rom is 1.48.405.2 wwe
and my spl-1.66.HSPL
and my radio version is 2.05.51.05_2
can i now go to radio step and install the custom radio
should i make the SPL-2.08 HPL and how please ??
how and my rom is 2.05.51.05_2
please help me i need android but i don’t know what i do ? i didn’t understand these steps well :S:S
thank you
Not sure HSPL2 ~ SPL-1.66.HSPL can use Android or not. You can try. But upgrade radio ROM to higher version is a must.
am afraid if that will brik my hd2
what radio should i use to upgrade please give me the link
Or you can remove HSPL2 first, then install HSPL3. https://www.jayceooi.com/2010/12/31/how-to-install-custom-radio-rom-on-htc-hd2-video/
FYI, I am using HSPL3, radio 2.15.
and what rom should i use ?
and thanks alot
What ROM does you mean? Android? Radio?
and how do you know my HSPL2 not HSPL3
and what is the deference ?
HSPL3 only have SPL-2.08.HSPL. HSPL2 is older than HSPL3. Not sure about the exact function different. Newer should be better, right? 😛
Dun know why i cannot install HSPL, it said “Bad SLP” >< Please help…i really want to make it!!
Are you using stock ROM 3.14? You need to have any SPL version in the post.
Yes im using 3.14 Rom, should i need to downgrade but i cannot download the 1.6 from the htc web page><
Yes.
okay thank you so much!! let me try again!!!
i have done it!!!!!!!!!yeah!!!!!!!!
but the following problem come…i cannot sync my outlook contact list to hd2….it said no enough space of disk ( should be sd card)??? how can i do this??
Sorry, I don’t get it. ‘Done it’ means Android installed?
How can i install HSPL3 on MAC?
Get Windows… 😉
how i can t uninstall win 7 and reinstall 6.5 ? help me plz
Just copy leoimg.nbh file to your SD card using SD card reader. Then continue from step 17 at https://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/
how i can t uninstall win 7 and reinstall 6.5 ? help me plz on htc hd2
Just copy leoimg.nbh file to your SD card using SD card reader. Then continue from step 17 at https://www.jayceooi.com/2011/01/01/how-to-upgrade-htc-hd2-rom-through-sd-card-video/ .
can it work in my M1i/aspen to?
Sorry, no idea…
HTC HD2 WM 6.5 for T-Mobile USA; I have SLP 2.10.000, Ratio version 2.15.50.14, ROM version 3.14.531.1 (04666) WWE, RAM size 576 MB, Flash memory size 1024 MB, can I use HSPL3_PKG.exe as it is shown in the video?, before doing this, can I format my SD card?, I would like to have everything clean before MAGLDR 1.11 and DFT NAND Android 2.2. Thank you guys, you all are doing a great job.
Sure, just format your SD card and install HSPL3.
I have the same phone/slp as alfonso^ im trying to switch from wm 6.5 to ics. ive tried to use HSPL3 and HSPL4 and i cant get either to open with 7zip? when i try to copy to desktop the computer makes a beeping sound and then the file n the desktop goes away. if i do catch it before it”dissapeers” and right click it to run it as admin it says windows cannot access the specified device,path,or file. you may not have the appropriate permissions to access the item. could you may do a video on how to download the HSPL3/4 versions correctly? btw im using windows 7
jonas, https://www.jayceooi.com/2011/08/15/how-to-install-hspl4-on-htc-hd2-video/
when i open the folder that has hspl4 in it, it has a folder named hspl4, it dosent say hspl4.exe like yours when i right click it to run as admin my only options are to open cut copy delete propertys.
Extract the whole folder out first.
hi,
I want to install HSPL3 BUT facing spl problem.
i have ROM 3.14 in my HD2
but in bootloader SPL version is 3.03.0000
how do i upgrade it to SPL 1.42.0000 or more ?
Just install HTC HD2 v1.66 ROM will do. You will get the correct SPL then.
hi jayce, i got spl 3.03 in my hd2 & radio 2.15.50.14. so, i just need to install cookie energy mobile 6.5.x custom rom using activesync to get 576 ram? is it correct? installation cookie energy mobile 6.5.x custom rom just like install htc hd2 v1.66 rom? please advice. thank you.
HSPL3 is not SPL3.03. Energy ROM requires HSPL3.
Jayce, to install energy rom:
1. downgrade my spl 3.03 to spl 1.66
2. hspl3 to get spl 2.08
3. install energy rom
procedures above correct? please correct me if i’m wrong? thanks jayce.
Step 1 and 2 are correct. 3rd step to install radio 2.15. Then Energy ROM.
bro..am usein Radio v2.11 should it work to install on wm 7…?
Is 2.11 radio supports 576MB RAM? If yes, then it can support. Else upgrade to 2.15 radio. I am using that one. Confirm working. 😉
Greetings,
I tried to update HSPL, and Radio, nothing works,
Just unable to connect properly to my device,
sometimes and just no seeing the device through those programs,
I’m using T_mobile version,
Is it may be the reason?
or have you any suggestion what might be the problem?
T-Mobile HD2 is supported if you have above listed SPL. Do you have Windows Mobile Device Center installed on Windows Vista / Windows 7 or ActiveSync installed on Windows XP?
hi
i am rameez….. i have just installed android on my htc hd2 it is very good….. every thing working fine but internet and mms is not working……. after reading comments and there solutions about internet and mms i made settings at first internet works but after few min its give me an error that internet is not working……. i think i have to reinstall the andriod but i dnt know how to reinstall the android…. i want to ask some questions……
Q1: how to reinstall android?
Q2: how to remove android if i want to go back to win 6.5?
thanks….
thanks
Which Android type are you using? SD card or NAND?
i am using NAND
A1. Just install any Android ROM will do.
A2. Follow this remove WP7guide (same to remove Android) – https://www.jayceooi.com/2011/01/18/how-to-remove-windows-phone-7-from-htc-hd2/
When I pressed the volume down and power the phone on instead of saying SPL- 1.42.00000 it says SPL2.08.HSPL .
PB81120 SS-B3
SPL-2.08HSPL 8G XE
0X05
CotullaHSPL 0x50
^ this is what it fully states. is this okay?
it also states R 2.10.50.26 When I power on the phone
Okay for what?
Hi Jayce,
Getting ready to do this on my replacement HTC unit. Will it work with ◦SPL 2.10.0000 and ROM version 3.14.531.1 (04666)WWE?
Thanks!
No, you need to downgrade to older ROM version first. HSPL3 cannot install on v3.14 ROM.
Hey Jayce,
Have you used PRJ Build Android? Can it be installed in place or instead of DFT_Android?
Yes, but not sure the same version as yours or not. Anyway, you can install other NAND Android that you like. 😉
Sorry to bother you with ongoing questions. The Downgrade ROM says…HTC HD2 ROM Version 1.66.707.1 Upgrade South East Asia and Europe. I’m in USA, will this ROM work with TMobile USA?
My mistake, you don’t need to downgrade your ROM. SPL-2.10 is okay to install HSPL3. Just saw 3.14 ROM. 😛
hey I am from India and I am unable to downgrade from 3.14 to 1.66 as there is no official 1.66 rom available on the htc india site.is there any solution to this. I wanted to install android on my phone but I am stuck now..pls help.
Try Android on SD card – https://www.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
I have ROM version 3.14. Do i need to downgrade to install HSPL3? If so where can i get version 1.66 for my U.S phone?
Use HSPL4 to install SPL-2.08.HSPL. – https://www.jayceooi.com/2011/03/07/download-dft-hspl4-for-htc-hd2/
thanks,
so do i follow the same steps in the video above except using HSPL4? and do i still need radio, DFT MAGLDR, and clockwork recovery to run Nand and other roms?
Yes, you still need other stuffs installed to run NAND Android.
1. do you need to download jaw-miui to download other roms?
2. which android rom would you say is the best? or gives the least trouble?
thank you.
1. No. Just download the Android ROM that you like.
2. I am using JDMS Ultimate now.
Hi I don’t know how to get 7-zip
Get it at http://7-zip.org
when i tried to download JDMs ultimate, it said download expired…
nvm, it was a older build. i found the right one
Okay I’m really lost with this I tried so manny different ways to get the android on this phone HD2 but I’m not sure what I’m doing wrong I spent 12 hours teying so manny different links and I still can’t get it. Can you please please please help me
Can you please send me a direct link to install the right program to get the android on my phone please. No matter how hard I try I just can’t get the right link and to install it right
What is your problem here? Do you have SPL version in the list for HSPL3?
I really don’t know what I have. And what is this radio I have to download…? no one is giving you any clear stept on how to do this 97% of the videos already have these link installed on there computer I download so many different links I don’t even know what is what. And what is SLP
All the downloads in the video guides are in the post. Do you have experience to flash Windows Mobile ROM before?
That’s my problem I have no experience at all, this is all new to me and I’m really trying hard. Just download SuperRam and I got Android, Media and Read me but I don’t know what to do now
First time is always the hardest. Take your time. You can do it sooner or later. 😉
That’s the thing where do I go from here….????? I still don’t know how to get Android on my phone. I just looking at the down loads and don’t even know my next stept
First comer should try this – https://www.jayceooi.com/2010/12/30/how-to-install-android-2-2-froyo-on-htc-hd2-video/
I’m trying but I can’t get the upgrade. What do I do to get it
Get what upgrade?
To the Official HTC HD2 Rom v3.14 I’m not getting this right I have so many stuff downloaded on my computer now it’s starting to move slow. How to get it all the SLP 3.03, Radio 2.15, Official HTC HD2 Rom v3.14 and Android 2.2 Froyo Rom which I think I have I’m not even sure
Download official HTC HD2 Rom v3.14 from HTC website. The ROM includes SPL-3.03 and radio 2.15.
There’s no link to update your phone on the HTC wesite any more. What else can I do
Can you email me a direct link to get all that I need in order to make this work…? Because I keep downloading all these different links and none is working. How did you get HTC HD2-Ruu le o.s htc Asia wwe 6147 076 Radio15.42.50.110_2.15.50.14_leo_s_ship link when you did the hard reset onto your desktop, because I’m trying and I can’t get it at all. I’m about to give up please help me
Which country HTC website did you go? I still able to find v3.14 ROM on South East Asia HTC website. Only download and use the ROM for your country.
I just wnt to HTC.COM I live in the U.S. and it’s no longer on there website
Are you using T-Mobile HD2? If yes, you need to download it at T-Mobile website.
I have an HTC Touch pro 2 can I get Android on this phone
http://forum.xda-developers.com/forumdisplay.php?f=589
Okay for the Touch Pro 2 how do I know which link to install to get android there is so many and there is more than one page with links
Sorry, I also don’t know as I don’t have Touch Pro 2 to test. You need to take time to find out.
Hi y I can’t install the hspl3 to hd2? It say rapi.dll Is missing try to reinstall it after I click the hspl3_pkg.thx
Do you have Windows Mobile Device Center installed on Windows Vista / Windows 7 or ActiveSync installed on Windows XP???
How do I know what SPL do I have?
The 4th step shows the SPL that you have.
When I try to install HSPL3 on my HTC HD2, the installation package of HSPL3 (Downloaded from your blog) says “The programme can’t start because RAPI.dll is missing from your computer. Try reinstalling the programme to fix this problem.” I tried saveral times but result is same. Please help me for removing this problem. Shall be thankfull to you.
Do you have Windows Mobile Device Center installed on Windows Vista / Windows 7 or ActiveSync installed on Windows XP??
THANK YOU! This could not have been simpler. You are amazing.
hey sorry for bothering you but my hd2 says the spl is 1.42.0000 and hspl3 errors says unable to find connection can you help me?
Which step are you at when you face this issue?
when installing hs3pl
Did your phone show ‘USB’ on ‘Red, Green, Blue and White’ screen?
no
Do you have Windows Mobile Device Center installed on Windows Vista / 7 ActiveSync installed on Windows XP?
joyce i have directly install magldre without installing hspl or custome rom and my cell is stuck on boot menu wat to do i dont understand plz help
Try below steps. You should be able to install HSPL if you still can load into bootloader.
1. Press volume down button (don’t let go) and power on your phone.
2. It will load into ‘Red, Green, Blue and White’ screen bootloader.
I tray to install MAGLDR 1.11…after completing,my htc hd2 reboot automaticly and come out white screen with htc logo but it stuck or hang…why…need ur advice on this…
What have you installed before install MAGLDR?
HSPL3…
i try to upgrade frm andriod 2.3 to HyperDroid CM7…
Which radio ROM are you using now?
ok before this i’m upgrade already my rom to 3 something…but i downgrade it to 1.66v…still working fine….but when i install HSPL3…u have to upgrade rom to 2.0 something….n working fine also…but the problem come out when finish install MAGLDR
Sorry, I don’t quite understand you. Make it simple. Do you have all the prerequisites
before install MAGLDR? https://www.jayceooi.com/2010/12/31/how-to-install-magldr-on-htc-hd2/
ok jayce..
1.i downgrade my rom frm 3.v to 1.66v then i install HSPL3
2.after completing install HSPL3process, my red/green/blue n white screen
display this
PB81100 SS-BC
SPL-2.08.HSPL 8G XE
0X05
cotullaHSPL 0X50
3.then i install the MAGLDR(ROM 1.66 TO 2.00) n all the way i click yes..
until it reboot n come out white screen with htc logo only and stuck or hang..
4.and i follow all your step…n how i can get back my old windows 6.5..
Hmm… You did not install radio 2.15. That might be the reason that causing this issue. Try to install radio 2.15 if you can.
i think that is the problem…ok i try…thank bro…
if you install the HARDSPL3 and still have the 3.14.531.1 ROM can i install the NAND Android file after i do the MAGLD file or do i have to install a different ROM and i have the 2.12.50.14 Radio is that a good version. im just asking because i dont want to brick my phone and when i turn my phone on it doesnt have the green HTC sign its has the T-mobile Stick Together Sign am i able to still get android on my phone….
I don’t have T-Mobile HD2 to confirm. But other who has it had no problem to install Android. Just make sure that you install all the prerequisites, then you should be fine.
So am I good with the 3.14 ROM since I already did the HARDSPL3
Yup, HSPL3 and radio 2.12 should be okay. FYI, I am using radio 2.15.
my Radio is 2.15.50 and my ROM is 3.14.531.1(04666)WWE im just asking after i do the hardspl3 do i have to do a different ROM or do i go straight in MAGLD
Nope, HSPL3 and radio 2.15 will do.
ok thanks
hi jayce..
i have upgraded ROM to 3.14 on hd2 but spl v is 2.08….im not able to start android on my phone.,when i boot to android from sd card it is automatically starting to windows….wat can i do now..????? thank you..!!
forgot to mention….ROM 3.14 Spl-2.08 hspl 8x…
Maybe you can try to format SD card and start a new fresh Android again…
but u hav mentiond that it need spl 3.03….is it psble to run on spl-2.08 3.14 ROM hspl 8x??
SPL-2.08.HSPL is better than stock SPL-3.03.0000. It supports all the Android ROMs out there.
hie before when i boot the phone it showed spl-2.08….micro(led)-x50
micro(touch)-x50 but now it i showing coutulla hspl….and im not able to install the android file its showing error.
No worry, SPL-2.08.HSPL is perfectly fine for Android. What error message did you get?
the error is—“The file CLRCAD cannot b opend ,eithr it s nt signeg oor frm trustd ource try re instaling.”
wat should i do….i found that whn i boot it shpws cotulla hspl…
Try to enable ‘Allow install and run unsigned applications’ in BsB Tweaks v1.6. https://www.jayceooi.com/2010/03/08/download-bsb-tweaks-v1-6-for-htc-hd2/
i downloaded the file but the installation is unsuccesfull…!!!
What is the error message?
http://www.addictivetips.com/wp-content/uploads/2011/03/HTC-HD2-HardSPL-2.08.jpg
dude this the scrren shot of boot scrren….instead of x40 it is x50 in my phone..
Not sure what is the different. Mine is x30 as in the video.
i tried installing bsb tweaks from the link posted by u above but the phone shows that installation is failed
Oh, what is the error message?
error was installation is unsuccesfull..!!
i want android wat to dooooo
Maybe you can try out NAND Android – https://www.jayceooi.com/2010/12/31/how-to-install-nand-android-on-htc-hd2/
or shall i upgrade the ROM again?? already i have 3.14 shall i upgrade it once again??
because at times i am facing problem with phone camera,teeter and sum applications..
when i open the camera it starts but sometimes it shows this error..!!
“” unable to start this program because there is not enough free memoery.please close some other programs and try again””
i need to restart the phone everytym when tym when i get this error
Do you mean that your Windows Mobile having issue now? If yes, you can try to hard reset to have everything start new.
Thanks for the Info Jayce very help but I am confused This what I have on my phone now:
OS
5.2.21913 (21913.5.0.94)
Manila Version
2.5.20181424
Rom Version
3.14.531.1(04666) WWE
Radio Version
2.15.50.14
How can I downgrade to 1.66 for tmobile US and also is there a HD2 Toolkit out there I can use to help me?
No need to downgrade, use HSPL4 – https://www.jayceooi.com/2011/03/07/download-dft-hspl4-for-htc-hd2/
Question I think my phone isn’t unlock will I need to do that and can I unlock the phone under the same network? Also how can I know if the phone is unlocked?
Sorry, can’t help to answer your question because my HTC HD2 is factory unlocked.
Hi…Can u give the link were i can download the gingerbread android..As presnt i am using windows os (the link which u hv give).I want to change completely to android…so plz send me the link of gingerbread..
https://www.jayceooi.com/2011/05/19/top-android-2-3-4-gingerbread-nand-android-rom-for-htc-hd2/
Hey jayce can u hellp me in giving the windows os link ..give me the os whch will hv the differnt type not like the previous os which u gave in link above..For example .the start button will be like slide opion etc…
Sorry, I don’t get you. What do you mean?
Os version -5.2.21869(21869.5.0.82)
Manila version -2.5.19211619.0
Rom version -1.66.707.1(76641)WWE
Radio version -2.06.51.7
Protocol version -15.30.50.07U
I WANT THIS OS.DO U HAV IT?
Sorry, I can’t really tell the exact ROM based on info above. Are you looking for stock HTC ROM? If yes, please get it from HTC website at your country.
HI jayce,
ive done already.. i change already my radio version same as the video u send me but when i check into my phone why still my radio version 2.06 i thought ist ok already how come like that?
Anything different between your phone with mine in the video? HSPL3 installed?
I’m guesssing this doesn’t work anymore now right?
Why not?
Hello! When i`m at step 11 my phone boots into the red/green/blue thingy , but the “USB” doesnt show in the white field below, and I get an error with connectivity with the usb. please help?
Did you install Windows Mobile Device Center installed on Windows Vista / Windows 7 or ActiveSync installed on Windows XP??
Hey Jayce I have the SD version of Android GingerBread installed is the NAND version much faster and can I use the GingerBread Files I allready have? Also I have 1.42HSPL is it better if you upgrade to HSPL3 for SD version?
I did not use SD Android for quite some times. So can’t comment on the latest build on speed.
SD Gingerbread files cannot be used for NAND Android.
I use 2.08.HSPL for all Android ROM. Did not try 1.42.HSPL before.
thank you verrrrrrrrrrrrrrrrrrrry much you for help me
Hey Jayce, i have a problem maybe you can help me. I have my HD2 plugged into my pc, active sync says phone is connected.. I run the HardSPL3 program, it tries for a while, my phone reboots the the 4 colour screen.. but then the program fails saying:
CRITICAL ERROR
Flow: 00000001
Error Code: 00000002
Description: USB Connect Failed!
I definately have SPL 1.42.0000 currently..
Do you have Windows Mobile Device Center installed on Windows Vista / 7 or ActiveSync installed on Windows XP?
yes i have jayce plzzzz help
Try to follow the latest guide here – https://www.jayceooi.com/2011/08/15/how-to-install-cwm-nand-android-on-htc-hd2-video/
nope still i can’t
Based on https://www.jayceooi.com/2011/08/15/how-to-install-hspl4-on-htc-hd2-video/
Did the serial status turn into USB after you connect USB cable from PC to phone?
hey im having a problem running hspl3, it tells me that RAPI.dll isnt running on my computer? can you help me out please
Do you have Windows Mobile Device Center installed on Windows Vista / 7 or ActiveSync installed on Windows XP? 😉
no i dont think so. how would i do that?
Install it.
Hi Jayce
I have done downgrade from SPL 3.03 to SPL 2.08, but I’m so curious why, whenever I try to bootloader, it just shown so quick then the screen is dark agan. though, it was shown once magdlr v.1.12. do you have any suggestions? I want to flash android again, many thanks
Please refer to this guide – https://www.jayceooi.com/2011/08/15/how-to-install-cwm-nand-android-on-htc-hd2-video/
when i open the DFT HSPL3 and press Next it says RAPI.dll is missing from your computer . Try reinstalling the program to fix this problem.
i have Rom Version 1.66.479.2
Install Windows Mobile Device Center on Windows Vista / 7 or ActiveSync on Windows XP…
Dear jayce,
You are always helpful to me. I have mdj froyo installed on my htc hd2. I am facing a problem. During installing applications from market some applications say that “Could not install on usb or storage card.” What should i do? Please help me. Shall be thankful to you.
Is the Android Market working for you previously?
This problem is from the begining. Now i have new version of Android market but the problem ia same.
In this case, it is Android ROM issue. Try to reinstall it again. Or try other Android ROM.
Hi Jayce,
I am new to this .
I have a HTC HD2 Telstra locked phone. Do you think is there anyway i can unlock my phone
Thanks in advance
Arun S
Sorry, I have no idea.
mines show PB81120 SS-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
Micro(TOUCH) 0x50
before i do the flash
Hello I have a doubt .. I have SPL-3.03 .HSPL installed. I must install HSPL 3 so here in this tutorial it is said that you must have any of these SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
I have SPL-3.03 .HSPL with 3.14V ROM. So should i downgrade my rom to 1.61v and spl to SPL 1.42.0000 ?
See If I have to install HSPL3 then I must connect my phone to pc and click active sync right. But I told you right I cannot enter. So what can I do now ?
Hello Can you please reply. I am waiting for your reply . Please 🙁
Jayceooi. Please I plead you. there is no one to help me. Please just this. Please Can you please ans this please ? I have 3.14 and 3.03 SPL . Can I now flash HSPL3 ?
HSPL3_PKG.exe i doesnt get these file
What did you get then?
When I connect my USB cable it doesnt change from SERIAL to USB…WHY??…WHAT AM I doing wrong?.. :/
Do you have prerequisites software installed on your PC?
oky i stopped at step 15 , didn;t get select ver screen and got CRITICAL ERROR USB connect FAiled :S
i have mob divice installed on Win7 and it’s closed when i run the HSPL i tried ver 3 and 4 same error so plz help
Do you have prerequisite software installed on your Windows?
thank you , fixed after i uninstalled kaspersky
i have tried this and it works but now my phone is not turning ON!!!neither it goes to the bootloader..help
Does your phone still have battery?
Yes it does.. Any other idea??
Sorry, no idea then since you can’t even power on it with battery.
omg, i think i messed it up! i did till step 5 then my phone didn’t turn on anymore…help please!… please somebody out there! jayce!!! help,help
Huh? You did not install anything until step 5. What can go wrong unless your battery is empty.
first of all,thanks for your quick reply: the battery is full. my htc is the htc hd2 t9193 from australia (telstra is the original operator) i live in chile. i finally got it turned on, but the screen is in red,white,red and blue now. any advice from here?
You can continue installation from there.
jayce: i don’t have enough words to thank you ( not only because english is not my first language, i could not even do it in my own-spanish-) you have done a great job! i’ve just isntalled android in my htc hd2 following all your instruccions and videos and i can’t be happier because i did it! one love,man.
the world would be a better place if there were a lot of people like you.God bless you,man
Hi Jayce,
Sorry if this has already been covered or is in the wrong place, but I’ve spent a lot of time researching this and I’m still confused. I have a TMobile HD2 with the following stats:
ROM: NexusHD2-ICS-CM9-HWA_V2.0 (flashed with a recent version of CWM)
http://forum.xda-developers.com/showthread.php?t=1434860
HSPL2.08
Radio 2.15.50.14
MAGLDR1.13
Before that I had NexusHD2-ICS-CM9_V1.5, but flashed the new one due to phone locking up/overheating (usually with 3g use, wifi, camera, or music playing). The new one definitely runs smoother, faster, and cooler (HWA!) but it still freezes/locks up completely most of the time with 3g use (wifi/playback/and camera problems are gone now, but the 3g problem is even worse now!) There’s nothing I can find on the developer’s thread for this ROM about this.
When I bought the phone in January 2011, it had WP 6.5, so I had someone who knew what they were doing flash a Froyo rom, which was fine for the year or so I had it on….but I can’t tell you what version of HSPL he used to put 2.08 and the current radio on it. I do know he put MAGLDR 1.11 on it, which I upgraded to 1.13 before I started installing ICS roms.
Do you think flashing a different HSPL and/or radio would help? Or even reflashing the current one? It seems like a radio problem to me, given the behavior of the phone, but I don’t really know. I’m just confused because I see information that seems to conflict about newer Android builds needing HSPL3 (top of this page, for example), and yet MAGLDR not working with anything but 2.08…but that post was a year old. I do understand the whole concept of HSPL3 not being the same as 3.03, but I’m still confused. Do I need to try re-flashing 2.08 using HSPL3 or HSPL4? Or do I flash 3.03? Should I reflash the same radio version or try downgrading it? I’m in Thailand now, but bought the phone in the USA…so I’m wondering if a certain radio works better with my carrier here? Thanks in advance…
I don’t think changing HSPL and radio ROM will help here. It looks like ICS ROM issue to me. You can try to use stable Gingerbread ROM. Or wait for better ICS ROM to come out.
First of all, thank you for your advice.
Don’t think it’s an ICS problem, though. After testing, I see that the most recent stable langthang Gingerbread MIUI ROM seems to have the exact same problem with my phone; everything runs very nice until I try to use 3g (actually EDGE; I never seem to get 3g where I am even though I’m in a 3g area). It works at first, but freezes within a couple minutes. Checked my APN/carrier settings; they should be fine. A CPU governor set to the most extreme (“powersave”) keeps it from freezing up the phone for only a little longer than having it set to “performance,” so I don’t see the point in using that as a workaround.
I can guess what most people are going to say at this point: dude, you got one of the HD2’s with a hardware overheating problem; sorry, buy a new phone. Well, I can’t afford to for a couple months so I’ve been trying to solve it in other ways. I’ve stress-tested it with everything but mobile data (heavy use of camera, playing music, videos, and using wifi) and no problems. It gets warm, but no problems. So why does using mobile data ALWAYS freeze it? I really don’t know anything about Android, but can you at least see why I thought switching to a different but still-compatible radio would help?
Not sure changing radio ROM will help or not. I don’t have 3G issue with radio 2.0.7, 2.12 and 2.15 that I tried.
Hmmmm, will post on xda before risking flashing radio and let you know how it turns out. Thanks again, as always!
im trying to change windows 6.5 to android… what im having is spl-1.42 and R2.07.51.22 what step should i go first? i triend to nstall hspl 3 on my hd2, but then there’s pop SYSTEM ERROR says “the program can’t start because RAPI.dll is missing from your computer. Try reinstalling the program to fix this problem.” what should i do? need help pls…
and..few info : radio 2.07.51, Rom v1.66.707, and OS v5.2.21869
Hi wani, please make sure that you have all the prerequisites.
yap im ok now yayyyyyy!!! thanks
u know how to screenshot on hd2?i mean not the app…is there any button i can use?
Which operating system?
Im using android v2.2
Android 2.2 does not have build in screenshot function with buttons. Android 4.0 has.
ooowh….is it ok if i want to change android 2.2 to 4.0? i mean is it good? is there be crash or lagging or something? if it is ok then can u give me the link which steps do i have to follow first? firstly i need u opinion on changing 2.2 to 4.0.
I did not try the latest Android 4.0 ROM myself. But heard from others, it is good.
https://www.jayceooi.com/2012/02/21/download-install-nexushd2-android-4-0-3-ics-cm9-rom-for-htc-hd2/
is it is possible to install android in htc hd2 t8585
i have
OS VERSION
5.2.21869(21869.5.0.82)
ROM VERSION
1.66.351.1
RADIO VERSION
15.32.50.07U
SPL 1.66
Yes venkat.
jayce sir,
how can i install andriod pls tell me step by step i have htc hd2 t8585 (virgin)made in korea
OS VERSION
5.2.21869(21869.5.0.82)
ROM VERSION
1.66.351.1
RADIO VERSION
15.32.50.07U
SPL 1.66
Hi venkat, please refer to this guide.
https://www.jayceooi.com/2011/08/15/how-to-install-cwm-nand-android-on-htc-hd2-video/
should i install hspl4 on my hd2 in order to upgrade its rom to the latest one by using sd card?
No need if you already have SPL-2.08.HSPL.
i have lost my os and my phone is not working due to loss of os 1.42.0000 tell me how to install the os in my htc hd2 t8585
Jayce, pleas advice me, how to i go from ice cream 4.0.3 to gingerbread 2.3.7. I dont know how to go about it. please help. i had upgraded my hd2 to android 4.0.3 so its giving me a problem in wifi. so i wanna try gingerbread.
Install the correct CWM layout size. Then install Gingerbread ROM.
Hi super man..amazing effort from you answering everybody..i have htc hd2 i did everything but my spl is 3.03 and i forgot to change it to 2.08 then went on with the steps..now my stupid phone is hanging on the whit HTC screen nd freezing there no life..i guess i killed the mother board..any solution..i tried reset..power button for ever nothing changed…thnx..
Hi Rashid, please refer to this guide. Redo everything.
https://www.jayceooi.com/2011/08/15/how-to-install-cwm-nand-android-on-htc-hd2-video/
Hey Jayce,
Is there an alternative to using Active Sync\Windows Mobile Device center??
Cheers,
God bless you!
As far as I know, nope.
Hello , my HTC HD2 phone wont turn on normally and the SPL is 3.03:0000. I want to know how to downgrade from SD card.
Downgrade from SD card. What do you mean here?
hey guys i can’t install HSPL3 nor even 4, when it downloads to the pc and i try to access it, it says that file can´t be openes and that i have not enough permissions, can help me?
the exact message is this: windows cannot access the specified device, path, or file. you may not have the appropriate permissions to access the item.
i also have installed windows mobile device center but when phone is on red, green, blue and white screen WMDC says phone is not connected, i would really appreciate your help.
Hi mike, do you have administrator right?
Primeiro lhe parabeniso pela aula. gostaria de sabe se tem como instalar portugus brasil ou portugal nele.